English
EspañolConstructed with high-tensile Q235B steel, robotic precision welding, and electrostatic powder coating. Designed to optimize vertical footprint while ensuring compliance with international racking safety standards.
From raw material metallographic analysis to final finite element structural analysis (FEA), Guangzhou Heda Shelves eliminates mechanical vulnerabilities to safeguard warehouse operational uptime.
We utilize premium Baosteel prime cold-rolled steel coils with a certified yield strength exceeding 235 MPa. Every raw steel batch undergo yield point verification and tensile stress profiling before entering our continuous roll-forming lines.
Our 16-pass cold roll-forming units yield precise omega-profile upright columns without residual metal stress. Precision CNC punch tooling provides consistent 50mm and 75mm pitches, guaranteeing strict connector pin alignment.
Each component undergoes a 9-stage pre-treatment cycle consisting of degreasing, ultrasonic descaling, and eco-friendly zirconium passivating before receiving cured electrostatic thermoset polyester powder.
Configurable structural dimensions tailored to high-density distribution centers, industrial manufacturing, and regional third-party logistics hubs.
| System Component | Dimension Profiles Available | Material Grade | Rated Load Capacities | Standard Surface Finish |
|---|---|---|---|---|
| Upright Columns | 80x60, 90x70, 100x70, 120x95 mm (Thick: 1.5 - 3.0mm) | Q235B / Q355B | Up to 24,000 kg total frame load | Pure Epoxy-Polyester Powder |
| Interlocking Box Beams | 80x50, 100x50, 120x50, 140x50, 160x50 mm | Q235B Cold-Rolled | 1,000 - 4,500 kg per beam level | Safety Orange (RAL 2004) Powder |
| Wire Mesh Decking | Wire: 4.0 - 5.5mm; Grids: 50x50, 50x100mm | Drawn Carbon Steel | 300 - 1,500 kg uniformly distributed | Electrolytic Zinc / Hot Galvanized |
| Structural Cantilever Arms | Length: 600 - 1800mm; Heavy Profile Arm | Q235B / I-Beam Section | 500 - 2,500 kg per individual arm | Signal Yellow / Marine Blue |
| Mezzanine Flooring Planks | Steel grating, perforated steel plates, BFU wood | Q235B Roll-formed plate | 300 - 1,200 kg per square meter | Galvanized / Anti-slip textured paint |
Based in Pazhou, Guangzhou, adjacent to the Canton Fair Complex. 20+ years of manufacturing experience, turnkey engineering support, and reliable export logistics.
Designing, fabricating, and delivering warehouse racks and commercial fixtures across 5 continents since 2001.
Full range from pallet racking, cantilever, and shuttles to retail gondolas and shop fittings under one factory roof.
Customized beam sections, heights, base plates, seismic designs, and colors to match your equipment requirements.
Every order is checked from raw sheet tolerance to dynamic load and powder adhesion before container stuffing.
Export sales engineers review warehouse layouts, supply CAD blueprints, and return quotes within 8 hours.
Global supply chain directors are balancing footprint optimization, robotic automation, and sustainability metrics when sourcing warehouse systems.
As robotic handling grows, demand is shifting toward tighter fabrication tolerances (under ±1.0mm) to support Autonomous Mobile Robots (AMRs), automated shuttles, and driverless narrow-aisle stacker cranes without structural deflection.
Global logistics hubs in the Americas, Southeast Asia, and Southern Europe now require racks engineered to Eurocode 3, RMI ANSI MH16.1, and AS4084-2012 seismic guidelines, with expanded floor base plates and heavy diagonal back-bracing.
Multinational 3PLs require Scope 3 decarbonization data. Manufacturing uses energy-efficient powder lines that reduce VOCs, alongside high-strength low-alloy (HSLA) steel grades that cut total raw material weight while preserving load capacity.
Rapid SKU shifts favor boltless, modular racking profiles. Knock-down modular components speed up international shipping packing efficiency, cut container usage, and allow facilities to reconfigure beams as inventory dimensions change.
Our project management team oversees calculations, packaging, and installation guidance across regional distributors and large logistics projects.
Multi-tier selective rack layout for automotive parts, integrating galvanized wire mesh shelves for mixed carton picking.
Designed for raw building material storage. Tested at 1.5x working load with zero permanent frame deflection.
High-density automated pallet shuttle system engineered with low-temperature cold-room steel for frozen seafood and produce distribution.
Engineered for active seismic regions, featuring expanded base anchoring plates and reinforced upright cross-bracing.
Clear answers on engineering limits, freight planning, quality control, and structural layout options.
Our pallet racking systems support from 800 kg up to 4,500 kg per beam level under uniformly distributed load (UDL) conditions. Heavy-duty cantilever arms support up to 2,500 kg per arm level, and industrial structural mezzanines range from 300 to 1,200 kg/m². Every project is custom engineered based on pallet dimensions, total load, and forklift lifting heights.
For seismic-prone regions (such as Latin America, New Zealand, and Japan), our engineering team conducts structural finite element simulations to calculate shear and horizontal loads. We reinforce upright cross-bracing profiles, increase steel baseplate thickness, install dual anchor bolts, and adjust beam safety pin profiles to comply with international seismic codes.
All structural frames, uprights, and box beams are roll-formed from certified high-tensile Q235B (equivalent to ASTM A36) or Q355B cold-rolled steel coils. Our automated finishing line applies a 9-stage degreasing and pre-treatment wash, followed by electrostatically cured thermo-polyester powder coating (70–110 microns) or hot-dip galvanizing for cold storage and corrosive settings.
Yes. Our dedicated design team generates full 2D AutoCAD equipment layouts, picking aisle designs, and 3D architectural renderings at zero upfront design fee before production. We assess turning radii, aisle widths (for counterbalance, reach, or VNA turret trucks), building column grids, and egress doors to maximize storage capacity.
All heavy racking components are designed with knock-down configurations. Upright frames can be delivered pre-assembled or flat-packed. Components are wrapped with heavy-gauge corrugated bubble film, corner guards, and steel banding, then secured on custom steel skids to maximize 40ft HQ container cube utility and prevent transit vibration damage.
Yes. We regularly supply distributors, material handling brands, and engineering contractors with full OEM/ODM branding. Custom beam profiles, column lengths, wire mesh deck sizes, safety barrier accessories, and any RAL powder coating colors (standard RAL 5015 blue, RAL 2004 orange, RAL 7035 grey, etc.) can be matched to your brand guidelines.